
浏览全部资源
扫码关注微信
纸质出版日期:2006,
扫 描 看 全 文
蒋显全,李宁,张伟.金属板带轧制用轧辊凸度数学模型的建立及应用[J].工程科学与技术,2006,38(2):95-99.
Foundation and Application of the Mathematical Model for Forecasting Roller Crown in Rolling Metal Plate and Strip[J]. Advanced Engineering Sciences, 2006,38(2):95-99.
中文摘要: 在金属板带的轧制中,不同品种和宽度的板带需要不同的轧辊原始凸度。在实际工程中,靠人为摸索和经验积累来估计凸度,不仅效率低、成本高,而且误差大。通过数学推导建立起适合不同品种、不同宽度的板带轧制的轧辊原始凸度抛物线曲线预测模型;经过优化和实际应用,采用正弦曲线来预测轧辊原始凸度可以明显减轻二肋浪,提高板带平直度。
Abstract:Metal plate and strip of different variety and different width require different primordial crown of roller. In practical process
the crown is designed by trial and accumulative experience
leading to low efficiency
high cost and big error. The paper sets up a mathematic model for forecasting the primordial crown of the roller in rolling metal plate and strip with different variety and width. The model is optimized and then practiced. The results show that the model adapting sinusoidal curve to forecast the roller crown can obviously reduce the double-rib wave and thus improve the flatness of the plate.
金属板带轧辊凸度板形
metal plateroller crownplate shape
Auzinger D,Djumlija G.Application of advanced aechnology packages for improved strip profile and flatness in hot-strip-mills[J].Iron and steel,2004,39(11):132-133.
Zhang Cai,Tan Jianping.Flat control of thin-gauge high-speed roll casting process[J].Cent South Univ Technol:Natural Science,2002,33(2):185-187.[张材,谭建平.超薄快速铸轧板形控制[J].中南工业大学学报:自然科学版,2002,33(2):185-187.]
湖海克明,加古幸博,阿高松男.厚板压延における板形状制とそれへの影响因子[J].塑性と加工,1984,25(9):15-32.
Hua Yunsong,Peng Yan,Liu Hongmin,et al.Simulation experiment on roll profile measuring of hot-strip mill[J].Heavy Machinery,2003(4):15-18.[华云松,彭艳,刘宏民,等.热轧板带轧机辊型检测模拟实验研究[J].重型机械,2003(4):15-18.]
Liu Jianchang,Gu Shusheng,Zhou Ying,et al.Optimum algorithm of flatness synthetical control[J].Journal of Northeastern University:Natural Science,1996,17(3):248-251.[刘建昌,顾树生,周瀛,等.板形最优综合控制算法[J].东北大学学报:自然科学版,1996,17(3):248-251.]
Wang Wenming,Liang Tao.Noises removing from roll casting flatness detection signals[J].Nonferrous Metals,2002,54(4):30-32.[王文明,梁涛.铝带坯铸轧板形检测信号的参数递推辨识与滤波并行除噪[J].有色金属,2002,54(4):30-32.]
聂毓琴,孟广伟.材料力学[M].北京:机械工业出版社,2004.
0
浏览量
2
下载量
8
CNKI被引量
关联资源
相关文章
相关作者
相关机构
京公网安备11010802024621