Deng Zhenbo, Mei Xiaoqin. Numeral Analysis of Powder Flow Filed on Coaxial Feeding Nozzle Forced by Gas in 3D Printing[J]. Advanced Engineering Sciences, 2016,48(Z2):165-172.
Deng Zhenbo, Mei Xiaoqin. Numeral Analysis of Powder Flow Filed on Coaxial Feeding Nozzle Forced by Gas in 3D Printing[J]. Advanced Engineering Sciences, 2016,48(Z2):165-172.DOI:
Abstract:Aiming at the shortage of repairing broken parts with spreading powder roller in existing 3D printing equipment
a novel coaxial feeding nozzle with a combination of sending powder and glue simultaneously was proposed in this paper. First of all
the structure of coaxial feeding nozzle was designed. Next
the mathematical model of powder flow concentration and mixed flow speed was established and the changes of powder flow concentration and mixed flow speed along axial direction at fixed flow velocity and flow rate were analyzed. And on the basis of gas-solid two-phase flow theory
the Euler-Lagrange model is set up for coupling calculation of the carrier to send powder nozzle gas-solid mixing flow
obtaining the effect of different powder particle material on the characteristic parameters. Comparing with two results
the results of mathematical model were the same with the Euler-Lagrange model. Gas flow rate
powder amount affect and the characteristics of particles mainly affected powder flow concentration and transmission speed and influenced focus length a little while focus length was mainly influenced by feeding channel angle and gas circulation channel width. Obtaining the parameters of particles provides the theoretical guide for optimizing the structure of coaxial feeding nozzle and manufacturing parameters.
关键词
3D打印同轴送粉数值分析气固两相流欧拉-拉格朗日模型
Keywords
three dimensional printingcoaxial powder feedingnumerical analysisgas-solid two-phase flowEuler-Lagrange model