###
工程科学与技术:2014,46(2):166-170
本文二维码信息
码上扫一扫!
半环面牵引式无级变速器接触应力分析
(四川大学 制造科学与工程学院)
Analysis for Contact Stress of Half Toroidal Traction Continuously Variable Transmission
(School of Manufacturing Sci. and Eng.,Sichuan Univ.)
摘要
图/表
参考文献
相似文献
本文已被:浏览 1908次   下载 1
投稿时间:2013-09-21    修订日期:2014-01-14
中文摘要: 在分析半环面无级变速器工作原理的基础上,建立了接触压力的计算公式,以赫兹接触理论为指导,给出了接触应力的计算公式。以某公司的样机为实例,讨论了接触应力的变化规律、影响因素。研究表明:在轴向力不变的情况下,接触压力和接触应力与接触点的位置有关,接触位置越靠近锥盘轴线,则接触压力和接触应力越大,接触椭圆的长轴越大,接触椭圆的短轴越小;接触应力随环面半径和环腔半径的增大而减小,随半锥角的增大而减小;接触应力对环腔半径的改变敏感度高,对环面半径和半锥角的改变敏感度低;将锥盘与滚轮设计为线接触,可大幅降低接触应力。其研究成果可为半环面型无级变速器设计提供理论参考。
Abstract:Based on the analysis of working principle of half toroidal CVT,and guided by Hertz contact theory,the contact stress calculation formula of half toroidal CVT was established. Taking a company’s prototype for example,the change laws and influencing factors of the contact stress were discussed.Studies showed that in the case of constant axial force, the contact pressure and stress are larger and relate to the location of the contact point,the contact position is closer to the axis of the cone,the contact ellipse’s major axis is longer,and the contact ellipse’s minor axis is smaller.The contact stress decreases with the increases of torus radius,cavity radius,and half cone angle.The contact stress have high sensitivity with cavity radius,and low sensitivity with torus radius and half cone angle.If the contact type of the cone disk and the roller is line contact,contact stress can be reduced significantly.The research results can provide theoretical reference for design of half toroidal CVT.
文章编号:201301171     中图分类号:    文献标志码:
基金项目:四川省科技厅应用基础研究计划资助项目(2012JY0085)
作者简介:
引用文本:
李华,李青涛,姚进.半环面牵引式无级变速器接触应力分析[J].工程科学与技术,2014,46(2):166-170.
Li Hua,Li Qingtao,Yao Jin.Analysis for Contact Stress of Half Toroidal Traction Continuously Variable Transmission[J].Advanced Engineering Sciences,2014,46(2):166-170.