###
工程科学与技术:2013,45(5):29-33
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
基于点谱相关函数的悬臂结构损伤识别
(后勤工程学院 土木工程系)
Study on Damage Detection of Cantilever Structure Based on Point Spectral Correlation Function
(Dept. of Civil Eng.,Logistical Eng. Univ.)
摘要
图/表
参考文献
相似文献
本文已被:浏览 1659次   下载 0
投稿时间:2013-04-11    修订日期:2013-05-15
中文摘要: 为了识别悬臂结构的损伤位置与损伤程度,提出基于点谱相关函数的损伤识别柔度法。该方法依据结构动力特征方程和悬臂结构的特点,利用柔度矩阵元素作为过渡,得到结构模态参数与杆件物理参数之间的对应关系等式,讨论并提出利用结构自由振动信号的Winger-Ville点谱相关函数平方根值代替结构模态参数的方法,建立点谱相关函数平方根值与刚度损伤系数的方程,通过求解方程组就能识别出结构单个或多个损伤的位置和程度。该方法物理意义明确,突卸荷载激励容易实现,且只需一次测量,无需损伤前后对比测试,有利于工程应用。最后通过2个数值算例,验证了所提方法的有效性。
Abstract:In order to identify the damage location and extent of the cantilever structure, a flexible damage identification method was proposed based on point spectral correlation function. According to the characteristics of the cantilever structure and the structural dynamic equation, the relational equation between the modal parameters and the structural member physical parameters was found by the transition of the flexibility matrix elements. Based on the free vibration signal of structure, the square root value of point spectrum correlation function was discussed and used as a replace of structure modal parameter. Then the damage equation of the square root value of point spectrum and the stiffness damage coefficient was established. The location and degree of single or multiple structure damage could be able to identify through solving the damage equation. This method has clear physical meaning and the unload excitation is easy to implement, and it could be helpful for applications without contrast test before and after damage. Finally, the effectiveness of the proposed method was verified through two numerical examples.
文章编号:201300317     中图分类号:    文献标志码:
基金项目:全军后勤重点科研资助项目(BS312J001);国家电网公司科技项目(SGKJ2007413);后勤工程学院研究生基金资助项目
作者简介:
引用文本:
杨朝山,程华,王仲刚,周凌,李迎涛.基于点谱相关函数的悬臂结构损伤识别[J].工程科学与技术,2013,45(5):29-33.
Yang Chaoshan,Cheng Hua,Wang Zhonggang,Zhou Ling,Li Yingtao.Study on Damage Detection of Cantilever Structure Based on Point Spectral Correlation Function[J].Advanced Engineering Sciences,2013,45(5):29-33.