###
工程科学与技术:2013,45(4):192-198
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
树脂特性对PVC增塑糊流变性能的影响
(国家复合改性聚合物材料工程技术研究中心)
Effect of Resin Characteristics on the Rheological Properties of PVC Plastisols
(National Eng. Research Center for Compound Modified Polymer Materials)
摘要
图/表
参考文献
相似文献
本文已被:浏览 1939次   下载 0
投稿时间:2012-08-24    修订日期:2013-01-21
中文摘要: 采用同轴圆筒黏度计研究了不同树脂原料制备的聚氯乙烯(PVC)增塑糊体系稳态流变性能,分析了树脂特性对增塑糊流变性能的影响。结果表明,所制备的增塑糊体系流动曲线特征主要取决于树脂的合成方式和树脂颗粒粒径大小和分布,体系黏度对温度的依赖性主要取决于树脂颗粒的粒径分布,粒径呈双峰分布的增塑糊体系黏度对温度更为敏感,更易于凝胶。在PVC糊开始凝胶之前,随温度的升高,所制备的增塑糊体系黏度对剪切速率的依赖性均减小,且有向牛顿流体转变的趋势。
中文关键词: 聚氯乙烯  增塑糊  流变性能  树脂特性
Abstract:The rheological properties of plastisols prepared by different PVC resins were evaluated using a DV-79+ pro coaxial cylinder viscometer by steady shearing.The effect of resin characteristics on the rheological properties of PVC plastisols was investigated.The results indicated that the flow property of plastisols is determined by the preparation process,the particle size,and the distribution of resins.The dependence of viscosity on temperature was determined by the particle distribution of resins,and the result showed that the viscosity of plastisols prepared by resins with bimodal particle distribution is more sensitive to temperature than that of plastisols prepared by resins with unimodal particle distribution,the plastisols prepared by bimodal particle distribution resins prefers to gel.The viscosity of plastisols showed less dependence on shearing rate with the temperature increasing,and the plastiols showed a trend to change into Newtonian liquid.
文章编号:201200627     中图分类号:    文献标志码:
基金项目:国家科技支撑计划资助项目(2007BAE10B03);贵阳市成果推广资助项目(筑科合同[2012203]号)
作者简介:
引用文本:
徐国敏,吉玉碧,罗恒,杨照,谭红.树脂特性对PVC增塑糊流变性能的影响[J].工程科学与技术,2013,45(4):192-198.
Xu Guomin,Ji Yubi,Luo Heng,Yang Zhao,Tan Hong.Effect of Resin Characteristics on the Rheological Properties of PVC Plastisols[J].Advanced Engineering Sciences,2013,45(4):192-198.