###
DOI:
工程科学与技术:2008,40(5):181-184
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
一种机械零件图像边缘特征的提取方法
(1.四川大学 电子信息学院,四川 成都 610064;2.四川大学 制造科学与工程学院,四川 成都 610065)
A Method of Extracting Edge Feature of Mechanical Component Image
摘要
图/表
参考文献
相似文献
本文已被:浏览 1468次   下载 212
投稿时间:2007-11-30    
中文摘要: 为了在嵌入式系统中实现对零件的有效分类,针对机械零件边缘特征比较明显的特点,提出了一种机械零件图像边缘特征的提取方法。首先采用Kirsch算子提取零件二值图像的边缘,然后以零件质心为中心将边缘图像划分为若干个子区域,并对各子区域分别计算出其修正的归一化中心矩,并将以此形成的行向量作为零件分类识别的特征。实验分析中采用K均值聚类算法对提取的零件边缘特征进行分类,实验结果验证了该方法的有效性。
Abstract:In order to effectively classify mechanical components in embedded system, a novel method was proposed to extract edge features of mechanical component images since mechanical components have comparatively obvious edge features. First, the Kirsch operator was used to extract the edge of mechanical component binary image. Then the edge image was divided into several areas with the centroid as the center, and the modified normalized central moments of each area were calculated. The vectors including these central moments were constructed to be the edge features of mechanical components. In the experiments, the means clustering algorithm was used to classify the components based on the extracted edge features, and the effectiveness was proved by the results.
文章编号:20080533     中图分类号:    文献标志码:
基金项目:国家自然科学基金资助项目(59975063)
作者简介:
引用文本:
严华,殷国富,宁芊.一种机械零件图像边缘特征的提取方法[J].工程科学与技术,2008,40(5):181-184.
.A Method of Extracting Edge Feature of Mechanical Component Image[J].Advanced Engineering Sciences,2008,40(5):181-184.