###
DOI:
工程科学与技术:2007,39(1):166-170
本文二维码信息
码上扫一扫!
基于含缺陷在役压力容器的模糊评定
(四川大学 制造科学与工程学院,四川 成都 610065)
Fuzzy Assessment Based on In-service Pressure Vessel Containing Defects
摘要
图/表
参考文献
相似文献
本文已被:浏览 1007次   下载 2
投稿时间:2006-02-24    
中文摘要: 为了确定压力容器的失效与安全程度,在精确评定的基础之上,提出了一种模糊评定方法。针对压力容器的平面缺陷的塑性与断裂评定,将评定点与通用失效评定曲线(FAC)的最小距离,转化为模糊程度因子,并根据模糊评定的隶属度,建立模糊评定模型,从而得出压力容器平面缺陷的失效与安全程度。进而采用综合评定方法可对容器的整体缺陷的失效与安全程度进行评定。该评定方法的结果直观、准确、可靠,也可以用于类似对象的评定与控制。
中文关键词: 压力容器  缺陷评定  模糊评定
Abstract:In order to confirm danger and security degree of pressure vessel, fuzzy assessment was put forward. Aimed to plastic collapse and fracture assessment of a plane defect of pressure vessel, the least distance ,between assessment dot and failure assessment curve (FAC), was translated into fuzzy degree gene. According to membership grade of the fuzzy assessment, fuzzy assessment model was established, and could be used to confirm the plane defect degree of danger and security. The whole vessel’s defects degree of danger and security were given by an integrated method. The method is intuitionistic, exact and reliable, and also could be applied to other analogous systems.
文章编号:20070133     中图分类号:    文献标志码:
基金项目:总装备部重点应用项目(总装司第661号)
作者简介:
引用文本:
龙伟,杜仕冲,余进.基于含缺陷在役压力容器的模糊评定[J].工程科学与技术,2007,39(1):166-170.
.Fuzzy Assessment Based on In-service Pressure Vessel Containing Defects[J].Advanced Engineering Sciences,2007,39(1):166-170.