
浏览全部资源
扫码关注微信
Published:2007,
扫 描 看 全 文
魏强,曹叔尤.新型滚珠旋转导致脉冲发生的试验研究[J].工程科学与技术,2007,39(4):16-19.
Experimental Study on the Mechanism of Pulse Activated by a Novel Rotary Ball. [J]. Advanced Engineering Sciences 39(4):16-19(2007)
中文摘要: 为了解决水力破岩、有效切割金属等工程问题,高压水力脉冲不失为一种有效方法,依据日常生活中的口哨原理提出了一种新型滚珠旋转脉冲喷嘴。新型滚珠旋转脉冲喷嘴产生脉冲机理极其复杂,为验证其脉冲效果,采用流速为50 m/s的高压泵对该喷嘴进行了初步的试验研究,并与普通喷嘴产生的高压水射流进行比较。试验研究结果表明,新型滚珠旋转脉冲喷嘴能产生高频脉冲;普通喷嘴产生的射流属普通湍流,无明显脉冲现象;新型滚珠旋转脉冲喷嘴产生的脉动压力远高于普通喷嘴产生的高压射流,有利于破碎岩石或金属。试验研究可为工程设计提供参考。
Abstract:High pressure hydraulic pulse is effective to deal with some engineering problems such as hydraulic breaking rock and cutting metals. This paper advances a novel rotary ball pulsing nozzle based on whistle principle in daily life. The mechanism of pulse activated by this novel rotary ball pulsing nozzle is pretty complex. In order to check up its effect
a high-pressure pump with 50 m3/s flow is used to experiment on the pulsing nozzle
and the results are compared with the high pressure efflux produced by general nozzles. Experiment indicates that the novel rotary ball pulsing nozzle can produce high frequency pulse
while the efflux produced by general nozzles is common turbulent flow with no obvious pulse; the fluctuating pressure produced by this novel rotary ball pulsing nozzle is far higher than the high pressure efflux by general nozzle
thus it is in favor of breaking rocks or metals. The experimental study has considerable reference value in engineering design.
水力脉冲喷嘴水力破岩射流脉动压力
hydraulic pulsenozzlehydraulic breaking rockjetpulse pressure
Hu Shougen,Ding Sheng.The principle and status of high pressure pulsed water jet[J].J East China University of Technology,1997,19(2):1-9.[胡寿根,丁胜.脉冲高压水射流工作原理及研究现状[J].华东工业大学学报,1997,19(2):1-9.]
Chahine G L,Conn A F,Johnson V E,et al.Cleaning and cutting with self-resonating pulsed water jets[C]//Proceedings of the 2nd US Water Jet Conference.USA:Rolla,Missouri.1983:167-175.
Liao Z F,Huang D S.Nozzle device for the self-excited oscillation of a jet[C]//Proceedings of the 8th International Symp on Jet Cutting Tech.UK:London.1986:195-201.
Liao Z F,Tang C L.Theoretical analysis and experimental study of the pulsed jet device[C]//Proceedings of the 4th US Water Jet Conference.USA:Berkeley.1987:135-144.
Xiong Jiyou.The mechanism of clearing away cuttings and breaking rocks using pulse jet nozzle[J].Natural Gas Industry,1995,15(2):38-40.[熊继有.脉冲射流喷嘴的清岩与破岩机理[J].天然气工业,1995,15(2):38-40.]
Sami S,Anderson C.Helmhotz oscillator for the self modulation of a jet[C]//Proceedings of the 7th Int Symp on Jet Cutting Technology,Canade.1984:165-170.
Jack Kolle,Mark Marvin.Hydro pulses increase drilling penetration rates[J].Oil & Gas Journal,1999,97(13):33-37.
Li Gensheng,Shen Zhonghou,Li Zaisheng,et al.Feasibility study of self-resonating cavitating jet for augmenting drilling rate[J].Petroleum Drilling Techniques.2004,5(3):1-4.[李根生,沈忠厚,李在胜,等.自振空化射流提高钻井速度的可行性研究[J].石油钻探技术,2004,5(3):1-4.]
Ni Hongjian,Han Laiju,Xu junliang.A rotor-modulated hydraulic pulse drilling tool in bit cavity[J].Drilling & Production Technology.2006(3):62-65.[倪红坚,韩来聚,徐俊良.钻头腔内转子调制式脉冲钻井工具[J].钻采工艺,2006(3):62-65.]
魏强.一种新型滚珠旋转式脉冲喷嘴:中国,200610021944.2[P].2006-09-26.
0
Views
1
下载量
1
CNKI被引量
Publicity Resources
Related Articles
Related Author
Related Institution
京公网安备11010802024621