Abstract:A theoretical model for a humidifier of PEM fuel cell systems was developed and analyzed based on the theory of heat transfer and mass transfer
which is intended to be used for the investigation of the performance of a humidification system. A general calculation methodology was developed to implement this model. Knowing a set of gas feeding conditions (i.e.
pressure
temperature
flow rate) and physical conditions of a humidifier (i.e.
channel geometry
heat transfer coefficients
etc.)
the model could provide information regarding the relative humidity and temperatures of outlet gases
as well as the temperature of outlet water. Using the parameters of 1 kW PEM fuel cell system
the proposed model was implemented in Simulink environment. The simulation results showed good agreement with the performance of the test bench.
Choi K H,Park D J,Rho Y W,et al.A study of the internal humidification of an integrated PEMFC stack[J].Journal of Power Sources,1998,74(1):146-150.
Chen Dongmei,Peng Huei.Modeling and simulation of a PEM fuel cell humidification system[A].Proceedings of the 2004 American Control Conference[C].Boston:IEEE,2004,822-827.
毛宗强.可再生能源丛书:燃料电池[M].北京:化学工业出版社,2005:47-73.
Wang Cheng,Mao Zongqiang,Xu Jingming,et al.Experiment on humidifier of detachment-integration stack[J].Journal of Chemical Industry and Engineering,2003,54(1):1608-1613.[王诚,毛宗强,徐景明,等.分体式质子交换膜燃料电池的膜加湿实验[J].化工学报,2003,54(1):1608-1613.]
华自强,张忠进.工程热力学[M].北京:高等教育出版社,2000:38-40.
王补宣.工程传热传质学[M].北京:科学出版社,1998:401-450.
Pukrushpan J T.Modeling and control of fuel cell systemsand fuel processors[D].Michigan:The University of Michigan,2003.