Improved Imbalanced Thrust Force Method (ITFM) Considering Overall Moment Equilibrium

您当前的位置：

首页 >

文章列表页 >

Improved Imbalanced Thrust Force Method (ITFM) Considering Overall Moment Equilibrium

更新时间：2023-11-14

- Improved Imbalanced Thrust Force Method (ITFM) Considering Overall Moment Equilibrium
- Advanced Engineering Sciences Vol. 44, Issue 3, Pages: 42-46(2012)
- 作者机构：
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Published：2012，
  
  Published Online：5 January 2012，
扫描看全文
方薇,孙正兵,何晓敏.考虑整体力矩平衡的改进不平衡推力法[J].工程科学与技术,2012,44(3):42-46.

Improved Imbalanced Thrust Force Method (ITFM) Considering Overall Moment Equilibrium. [J]. Advanced Engineering Sciences 44(3):42-46(2012)
方薇,孙正兵,何晓敏.考虑整体力矩平衡的改进不平衡推力法[J].工程科学与技术,2012,44(3):42-46. DOI：

Improved Imbalanced Thrust Force Method (ITFM) Considering Overall Moment Equilibrium. [J]. Advanced Engineering Sciences 44(3):42-46(2012) DOI：

摘要

中文摘要: 为了提高常用的剩余推力法的精度，通过引入比例因子确定条间力作用倾角，建立同时考虑力平衡和力矩平衡的联立方程组，求得边坡安全系数，并通过算例验证了其可靠性。研究表明：不平衡力矩和边坡安全系数均随着比例因子的变化而接近线性改变；相对于常规不平衡推力法而言，改进法求解安全系数时具有更高的精度和更快的收敛速度；在不考虑水平地震力时，条间力方向与条底滑面基本平行；考虑较大地震力作用时，条间力倾角变化主要集中发生在边坡后部的少数几个条块中。当比例因子为零时，改进不平衡推力法与常规不平衡推力法是一致的，故其可以视作常规法的扩展形式。

Abstract

Abstract:In order to improve the precision of conventional imbalanced thrust force method (ITFM)

by introducing proportion coefficient n

inter-slice force inclination was determined and equation set could be established to obtain the safety factor Fs

taking both force equilibrium and moment equilibrium into account. The reliability was finally verified by several examples. Researches showed that imbalanced moment and safety factor vary near linearly when n changes. Derivation of safety factor of the method owns faster convergence speed than conventional ITFM

as well as better accuracy. Without horizontal seismic force

inter-slice force inclination is similar to the slip surface

but inclination variation mainly occurs in few rear slices of the slope while taking significant seismic force into consideration. When n=0

improved ITFM is equivalent to conventional ITFM

and consequently it could be regarded as an extension of the conventional one.

关键词

边坡稳定安全系数整体力矩平衡改进不平衡推力法比例因子

Keywords

slope stabilitysafety factoroverall moment equilibriumimproved ITFMproportion coefficient

references

朱禄娟,谷兆祺..二维边坡稳定方法的统一计算公式[J].水力发电学报,2002,(03):21-29.doi:10.3969/j.issn.1003-1243.2002.03.004.

张鲁渝..一个用于边坡稳定分析的通用条分法[J].岩石力学与工程学报,2005,(03):496-501.doi:10.3321/j.issn:1000-6915.2005.03.022.

时卫民,郑颖人..边坡稳定不平衡推力法的精度分析及其使用条件[J].岩土工程学报,2004,(03):313-317.doi:10.3321/j.issn:1000-4548.2004.03.002.

张宜虎,尹红梅..剩余推力法及其在斜坡稳定性评价中的应用[J].岩土力学,2004,(04):628-631.doi:10.3969/j.issn.1000-7598.2004.04.026.

易朋莹,王凯..基于传递系数法的滑坡滑带土强度参数反分析研究[J].中国地质灾害与防治学报,2008,(04):23-26.doi:10.3969/j.issn.1003-8035.2008.04.005.

徐青,陈士军..滑坡稳定分析剩余推力法的改进研究[J].岩土力学,2005,(03):465-470.doi:10.3969/j.issn.1000-7598.2005.03.026.

张奇华,彭荣生..考虑力矩平衡的剩余推力法及其应用[J].长江科学院院报,2008,(06):67-70.doi:10.3969/j.issn.1001-5485.2008.06.015.

潘家铮,建筑物的抗滑稳定和滑坡分析,北京:中国水利水电出版社,1980.

张鲁渝,郑颖人,时卫民..边坡稳定分析中关于不平衡推力法的讨论[J].岩石力学与工程学报,2005,(01):177-182.doi:10.3321/j.issn:1000-6915.2005.01.030.

Fredlund D C,State of the art analytical methods for slope stability analysis,Toronto:Ont,1984.

Fredlund D G,Krahn J,Conoarison of slope stability methcts of a- nalysis,Canadian Geoteehnieal Journal,1977(3).

陈祖煜,土质边坡稳定分析--原理@方法@程序,北京:中国水利水电出版社,2003.

更多指标>

Views

下载量

CNKI被引量

Alert me when the article has been cited

提交

Tools

Publicity Resources

Fast Estimation for Reliability Index of Soil Subgrade Slopes Based on Safety Factor

Numerical Simulation of Hydraulic Response of Immersed Slope Based on Dual-permeability Model of Unsaturated Macropore Flow

Non-slice Calculation of Safety Factor and the Determination of Critical Sliding Surface of Homogeneous Ground Embankment

Seepage Effect Analysis of Surrounding Rock of Underground Caverns at Karst Region

Related Author

No data

Related Institution

长沙理工大学交通运输工程学院

中铁二院工程集团有限责任公司

School of Civil Eng., Southwest Jiaotong Univ.

MOE Key Lab. of High-Speed Railway Eng.

School of Civil and Environmental Eng., Harbin Inst. of Technol.,, Shenzhen

⁰